RC Slope Soaring in Hong Kong
http://rcsail.com/forum/

mks,6125
http://rcsail.com/forum/viewtopic.php?f=3&t=2022		 Page 1 of 1
Author:  ac [ Wed May 04, 2011 11:46 pm ]
Post subject:  mks,6125
mks6125以到星期曰見 :o
Author:  CM Cheng [ Wed May 04, 2011 11:58 pm ]
Post subject: 
早啲到有冇得揀先呢 :P
Author:  sang [ Thu May 05, 2011 6:19 am ]
Post subject: 
快D比我裝啦，只剩這兩隻servo.是否有底板跟埋，如果有就容易好多。
Author:  ac [ Thu May 05, 2011 8:25 pm ]
Post subject: 
CM Cheng wrote:
早啲到有冇得揀先呢 :P
有,不過隻隻都咁正喎,你想點揀先.
Author:  Stanley [ Thu May 05, 2011 9:34 pm ]
Post subject: 
AC
記得留番4隻比我，下次見面時比錢，謝謝！
Author:  ac [ Thu May 05, 2011 9:36 pm ]
Post subject: 
sang wrote:
快D比我裝啦，只剩這兩隻servo.是否有底板跟埋，如果有就容易好多。
有底板,一隻servo跟一個,低板用木,造得好靚.
Author:  kin [ Sat May 07, 2011 1:08 am ]
Post subject: 
Don't forget my cnc servo tray ! : http://www.smartmodel.com.hk/products/p ... age=image1
Author:  ac [ Sat May 07, 2011 10:17 pm ]
Post subject: 
kin wrote:
Don't forget my cnc servo tray ! : http://www.smartmodel.com.hk/products/p ... age=image1
堅叔,講到低板緊係唔夠你D靚喇. :lol:
Author:  ac [ Thu May 19, 2011 9:57 pm ]
Post subject: 
各位有份購買MKS6125既老友,請張伺服器試清楚是否正常,因為發現不正常震動,請留意,現在發現三宗個案,如有發現,請與我聯絡. :shock:
Author:  donny [ Thu Jun 02, 2011 10:09 am ]
Post subject: 
ac wrote:
各位有份購買MKS6125既老友,請張伺服器試清楚是否正常,因為發現不正常震動,請留意,現在發現三宗個案,如有發現,請與我聯絡. :shock:


Hi AC,
我有一隻有問題,請問可否寄回去修理或更換?
謝謝

Donny
Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/